blog posts

How To Change The Bandwidth Of 2.4 Or 5 GHz Wi-Fi In Windows 10

Bandwidth, But why do you have to change the WiFi band? If your modem supports 5 GHz and your system adapter does, you will get better internet speeds. However, sometimes the computer is unable to detect the 5 GHz band and uses 2.4 GHz automatically.

That’s why you have to force it to use better frequency. First, let’s see if your computer supports that bandwidth.

Check supported bands

Step 1: Go to the Start menu and type cmd and then run it.

Step 2: Enter the following command and press Enter.

netsh WLAN show drivers

Step 3: Now, you can see the supported bands.

• 802.11g and 802.11n mean your system only supports 2.4 GHz.
• 802.11g, 802.11n, and 802.11b mean that your system only supports 2.4 GHz.
• If multiple bands, including 802.11a or 802.11ac, are shown, your system supports both 2.4 and 5 GHz bands.

Bandwidth change between 2.4 GHz and 5 GHz

Step 1: Right-click on the Start menu to launch the WinX menu.

Step 2: Select Device Manager.

Step 3: Click on Network Adapters.

Step 4: Right-click on your WiFi adapter and click Properties.

Step 5: Click on the Advanced tab.

Step 6: In the Property section, click Band or Preferred Band.

Step 7: Now, in the Value section, select the 5 GHz option.

Step 8: Click OK.

This method is straightforward, but it helps you to have better internet speed. Of course, miracles are not going to happen, and your internet speed will increase, but you will have a more stable and suitable band for Wi-Fi.

Of course, there are different ways that you should try different ways to make sure you have the right internet speed. One of these ways, of course, is to change the WiFi bandwidth. This tutorial has prepared a 2.4 or 5 GHz WiFi bandwidth switch in Windows 10 for you, dear ones.