Phones, Tablets, And Smart Watches Sometimes Have A High Price, And Damage To Them Can Cause Significant Damage To Us. 

These devices’ most important and perhaps the most vulnerable part should be considered their display. In the rest of this article, we will teach you how to install a glass or screen protector to protect it from impact and scratches.

Choosing a good screen protector is very important because different types have different levels of hardness and resistance, and sometimes they affect the phone screen’s transparency, light reflection, and opacity.

Most of the screen protectors available in the market are ready-made and specially made for different models of smartphones or other digital devices.

Therefore, knowing how to install Glass Mobile is of particular importance. Thus, in the rest of this article, we have discussed how to install the screen protector.

At the beginning of the tutorial on installing phone glass, we must say that semi-hard and transparent protectors such as PET can be considered the best types of these accessories that can protect your phone well against scratches or falling from a low height. The matte and semi-transparent types of this type of sticker can also match your desired appearance and protect the screen.

Tough labels are also usually made with heat-treated glass and a plastic layer, providing great resistance to scratches.

Of course, these glass protectors are very hard, very fragile, and break easily. Installing glass for a tablet or phone at home can prevent future problems.

If you drop your phone a lot or you have to work with it in environments with sharp objects, thick plastic layers such as polycarbonate can protect your device from direct impact and sharp objects. Of course, these labels may hurt the touch accuracy of the phone screen. Of course, knowing the correct way to install glass is important.

Remember that screen protectors protect your phone from light and not-so-thick scratches, but dropping the device from your hands can easily break a part of the screen and mean the end of its life. Therefore, in addition to learning how to install a screen protector, it is necessary to use a case with a hard frame that covers the edges of the screen well. The advantages of the display are usually very vulnerable to breakage.

Ceramic glass installation training

Ceramic glasses have features such as resistance to high temperatures, excellent mechanical durability, and the possibility of using for a long time. Of course, this type of screen protector has a relatively high price. Ceramic glasses are extremely flexible and do not break after impact; Therefore, they are considered a suitable option for long-term use.

The following video will teach you how to install ceramic glass. Remember that to install the phone glass, you must observe conditions such as a clean work environment.

UV glass installation training

Installing UV mobile glass on today’s phones, many of which have curved edges, is not easy. In the following article, you can see the instructions for installing UV glass on a screen with a curved perimeter.

Nano glass installation training

You can use the video below to learn how to install Nano phone glass. Nano protectors have a good scratch and impact resistance and are mostly reasonably priced. These glasses do not affect the clarity and brightness of the screen.

How to install Privacy Glass

How to install Priusi-type glass is no different from other types of screen protectors. The way to remove the mobile glass is to clean the screen of your phone or tablet completely and put the privacy glass on it after removing the screen. Priusi glasses are designed to protect your privacy so that the display can only be seen from certain angles and by the user himself.

Step-by-step tutorial on how to install phone glass

It’s important to remember that excellent care for your digital device’s display includes a sticker and frame combination. In the rest of this article, we will review the correct glass installation method together.

1. Find a clean place with minimal dust

The first step in learning how to install a screen protector is to choose a closed and clean space. , If possible, you can also fill the environment with water vapor, and after the steam has subsided, start installing the glass on the phone because there will be less dust than usual in the room.

This article will review how to install phone glass at home. For this, your hands and work environment must be immaculate.

2. Clean the display

The correct way to install glass includes a clean cloth. First, wipe the screen with a clean cloth containing a light solvent, such as a combination of water and a little soap or alcohol with small amounts of isopropyl alcohol, and dry it with another fabric. Now, gently wipe off the remaining dust with the microfiber cloth usually sold with the screen protector.

3. Determine the location of the protector

At this stage of the mobile glass installation tutorial, remove the screen protector from the box and check its position on the screen without removing the back layer. Now determine and remember the distances that must be observed for the correct placement of holes, such as selfie cameras and microphones.

4. Removal of dust residue

The remaining air bubbles under the sticker will disappear in the long run, but the dust will remain there forever, posing a serious challenge to your user experience. The way to install the mobile glass is to remove all the excess dust from the screen using a piece of adhesive before installing the protector.

Looking at the light reflection on the phone screen from the side angles is the best way to determine the presence or absence of dust on the net. Some protectors come with a sticker to remove extra dust.

5. Install the screen protector

At the end of this part of the phone glass installation tutorial, it is important to mention that the screen protector has a shell you must remove before use. We suggest that you separate this shell into the middle so that you can control it by taking the other part.

Now carefully place the label on the screen, considering the distances you determined in the third step. Now you can remove the rest of the shell and place the protector completely on the net. Stay with us as we continue the process of installing Glass Mobile.

6. Possible problems

In this part of the tutorial on how to install glass on the phone, we must say that if, after following the method of installing mobile glass up to this point, you notice that there is some dust left on the screen, you should ignore it, because trying to remove it will cause There will be more problems.

If you install the phone glass correctly and in a clean environment, dust particles will not remain under the glass. But you can also use a sticker to remove large amounts of dust. To adjust the sticker’s location on the screen and follow the installation method of Glass Mobile, you can gently separate its corner and move it by hand.

7. Remove air bubbles

This section will discuss installing the screen protector and removing the resulting bubbles. To do this, press the bubbles towards the edges with your finger or a device such as a credit card. Note that you don’t need to pop all the bubbles, as they will all disappear with finger pressure and time. In the following, we will teach you how to install other commonly used phone screen protectors.

Summary and answers to frequently asked questions

In this article, the hardware city team has taught you how to install glass or different types of smartphone screen protectors so that you can easily enjoy your newly purchased phone and not pay extra.

Should the screen be wet or dry when installing the glass?

The correct way to install the glass is to first moisten the screen with a clean cloth containing water and a little soap or alcohol to remove fingerprints on the screen and then dry it with another material and then dry the glass on the net. And install free of dust particles.

Why does the bubble fall when installing the phone glass?

If you carefully install the phone glass, you will not see a bubble under the glass. Most of the bubbles created during the glass installation are due to the presence of dust particles, which can be removed by using a sticker and lifting the glass.