DED9

What Is Fiber Optic Telecommunication And FTTX?

These Days There Is A Lot Of Talk About Fiber Optics And Fiber Optic Telecommunications. A Powerful Technology Provides Users With Very High Bandwidth And Significantly Reduces The Speed Of Downloading And Uploading Files. 

Because of its many advantages, fiber optics are used by many companies and users as a solution to overcome the limitations of other methods. However, the above technology also has limitations.

In this article, we intend to briefly introduce you to the two essential terms of fiber optic telecommunications and FTTX.

What is fiber optic communication?

Fiber optic telecommunication transmits information from one place to another by sending light pulses through an optical fiber. Light is an electromagnetic carrier wave that is modulated to carry information.

The development of optical fiber communication systems in the 70s revolutionized the communication industry and played a significant role in the emergence of the information age.

Due to the advantages of optical fiber communication over information transmission systems from electrical infrastructure (such as twisted pair wires, coaxial cables, etc.), optical fibers have mainly replaced copper wires in the core of networks developed worldwide. Many telecommunications companies use optical fiber to transmit telephone signals, Internet connections, and cable TV signals.

Researchers using communication fiber optics at Bell Labs have reached internet speeds of over 100 petabit x km/s.

The communication process using optical fiber involves the following basic steps:

Generating optical signals by a transmitter, relaying the movement along the fiber (the whole process of repeating the signal and amplifying it is called relaying), ensuring that the signal is not too distorted or weakened, receiving the optical signal, and converting it into an electrical signal.

Many telecommunications companies use optical fiber to transmit telephone signals, Internet connections, and cable TV signals. Due to the lower rate of attenuation (loss of signs) and interference (caused by noise in the environment), optical fiber has many advantages over copper wire over long distances (communication between cities, provinces, a country with other countries, and intercontinental communication) or high demand for access to information (such as the Internet, which requires very high bandwidth with the lowest level of error in transmitted and received signals).

However, developing infrastructure between cities was relatively difficult and time-consuming, and fiber optic systems were complex and expensive to install and run.

Due to these problems, the optical fiber communication system was primarily installed and launched in projects with very long distances. They could use this platform’s maximum information transmission capacity—this work compensated for the increased costs.

Since 2000, the price of optical fiber communication equipment has decreased significantly.

The cost of transferring, installing, and installing optical fiber to homes is more affordable than copper cables for telecommunication, Internet, and television communication.

Due to these problems, the optical fiber communication system was primarily installed and launched in projects with very long distances. They could use this platform’s maximum information transmission capacity—this work compensated for the increased costs. Since 2000, the price of optical fiber communication equipment has decreased significantly.

The cost of transferring, installing, and installing optical fiber to homes is more affordable than copper cables for telecommunication, Internet, and television communication.

Due to these problems, the optical fiber communication system was primarily installed and launched in projects with very long distances. They could use this platform’s maximum information transmission capacity—this work compensated for the increased costs. Since 2000, the price of optical fiber communication equipment has decreased significantly.

The cost of transferring, installing, and installing optical fiber to homes is more affordable than copper cables for telecommunication, Internet, and television communication.

Active optical network

AONs use active (electrical) network equipment, such as switches or routers, to distribute signals. Incoming calls do not interfere because the equipment provides buffering for traffic. Usually, signs require optical-electrical-optical conversion.

Active Ethernet is a common AON that uses Ethernet optical switches for signal distribution and places the customer site and the central office in one extensive Ethernet system.

These networks are similar to Ethernet networks used in businesses and educational settings, except that they are intended to connect homes and buildings to a central office rather than connecting computers and printers in one location. Each switch cabinet can handle up to 1000 clients, but 400-500 clients are more typical.

What is GPON?

Point-to-Multi point (GPON) technology is one of the PON technologies called Passive optical news, which uses a fast information access mechanism based on the essential feature of using passive splitters in fiber optic distribution networks.

Takes. In this fiber optic access network, only one fiber is received from the provider’s hub and sent to multiple consumers in small businesses or home users. In Jpan technology, the download speed equals 2.488 Gbit/s, and the upload speed is similar to 1.244 Gbit/s.

The above technology sends download signals to subscribers in broadcast and encrypted form. Point-to-multipoint networks are made of two main parts: Optical Line Terminal with the capacity to serve at least 1000 network subscribers and Optical Network Terminal-Unit, installed in offices or homes.

It seems that the future is moving towards using PON because its maintenance cost is low and its stability is high; the signal attenuation problem is less than in similar examples, and It offers the ability to increase network access bandwidth.

What is FTTx?

FTTX (Fiber to the x) is a general term for any broadband network structure that uses optical fiber to provide all or part of the connection required in last-mile telecommunications.

Due to the greater capacity of optical cables in carrying data than copper cables, especially over longer distances, copper telephone networks are being replaced by fiber. FTTX is a general term for all fiber-based configurations, which are divided into two groups:

FTTP/FTTH/FTTB and FTTC/N. There are many different types of FTTX configurations in the telecommunications industry.

There are various terms related to FTTX, the most important of which are the following:

 

Fiber optic cablesUnlike traditional telephone lines and ADSL, they can transfer data at high speed over long distances. For example, typical gigabit Ethernet (1Gb/s) that uses cost-effective cat-5 and cat-6 cables can only cover 100 meters, while fiber-based Ethernet can easily cover tens of kilometers.

As a result, all major telecommunication providers worldwide use FTTP for direct transmission to the customer using symmetric 1Gbit/s long-distance connections. FTTP configurations that run fiber directly to the customer premises have the highest speeds, as the remaining parts can use a coaxial cable or Ethernet. Google Fiber has a speed equivalent to 1Gibt/s.

It is commonly stated that the future of fiber is guaranteed because the limitation of the data exchange rate is caused by the equipment used, not the thread itself. This allows for dramatic increases in speed by replacing the equipment without changing the tlineead itself.

However, the type and length of fiber (e.g., multimode or single mode) significantly impact its future capabilities for connections above 1Gbit/s. FTTC, where the thread is stretched to a coffee shop in the street, is usually far enough away from users to not allow Ethernet to be used over existing copper cables.

In such situations, DSL with a very high bit rate (VDSL) is usually used, which provides a download bandwidth of up to 80 Mbit/s, but this speed drops sharply at distances greater than 100 meters.

However, the type and length of fiber (e.g., multimode or single mode) significantly impact its future capabilities for connections above 1Gbit/s.

FTTC, where fiber is stretched to a coffee shop in the street, is usually far enough away from users to not allow Ethernet to be used over existing copper cables. In such situations, DSL with a very high bit rate (VDSL) is usually used, which provides a download bandwidth of up to 80 Mbit/s, but this speed drops sharply at distances greater than 100 meters.

However, the type and length of fiber (e.g., multimode or single mode) significantly impact its future capabilities for connections above 1Gbit/s.

FTTC, where fiber is stretched to a coffee shop in the street, is usually far enough away from users to not allow Ethernet to be used over existing copper cables. In such situations, DSL with a very high bit rate (VDSL) is usually used, which provides a download bandwidth of up to 80 Mbit/s, but this speed drops sharply at distances greater than 100 meters.

Fiber optic splitter

An optical splitter is an optical fiber support device with many input and output terminals for connecting MDF and terminal equipment and optical signal branching, especially for the passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.). A fiber optic splitter, also known as a beam splitter, is a passive optical device that can split an optical beam into multiple optical beams. Optical fiber splitters can be divided into FBT (Fused Biconical Taper Splitter) and PLC (Planar Lightwave Circuit splitter).

FBT splitter

It is one of the most common splitters. FBT splitters are widely used in passive networks, especially for smaller split configurations x2, 1×4, 2×2, etc1.

PLC splitter

PLC is a newer technology. PLC splitters offer a better solution for larger applications. The PLC splitter is fabricated using lithography on a silica glass substrate, which allows specific percentages of optical routing. As a result, PLC splitters provide precise and minimal loss splitting in a small package.

Balanced splitters

Balanced splitters (N*2) consist of 2 input and N output fibers that divide the optical signal power proportionally. They are mainly used for asynchronous redundancy.

Die mobile Version verlassen