To reset the network card in the command line or the CMD, run the following commands in order and then check if your connection problem is solved or not. This method can be used in Windows 10 and 11.
To start the network reset process, click on the network reset option in the status menu.
Remember to press enter after typing each command line. Among all the Windows 10 network commands, it can be said that the ping command is a command that almost everyone is familiar with and has used before. This command is used to clear and reset network adapters in settings.
Reset Network Adapter In Windows 10 Using CMD A Savvy Web
On the Windows settings page, click on “network & internet.” Then, on this page, click on the “status” tab on the left side, and then go to the bottom on the right side and click on the “network reset” link. Now turn on/off the network discovery option from the control panel.
If you have a VPN or proxy server may need to be reconfigured after the reset.
Close the notification and save all your work (see the image below). Finally, click the reset now button to reset the network settings. Open Settings. Click on the network & internet icon.
Or press the win + r keys and type cmd. Then press enter. To open Windows settings, just press start and then click on the settings button that looks like a gear or press windows+i on your keyboard.
Go to the network and internet settings section and the bottom of the page to see the search section. Then search and select settings (gear icon).
To reset the network settings, click on the network reset option below. Remember to press enter after typing each command line.
At the command prompt, run the following commands in the order listed, and then check if your connection problem is resolved.
On the Windows settings page, click on “network & internet.” After opening this page, select the “status” tab on the left side and then go down to the right side and click on the “network reset” link. Then type the netsh Winsock reset command and press enter.
Close the notification and save your files.
Type “command prompt” in the Windows search bar and then click command prompt from the list of results. Instead, you can simultaneously press Windows + r on the keyboard, type cmd, and press ctrl + shift + enter to open the command prompt and run as administrator.
Read the information that is displayed. Then you will be taken to a new page.
It doesn’t matter if you are dealing with a big problem connecting to the network or if your problem is minor; In any case, the ping command will solve your problem.
How to reset network connection in Windows 10
After clicking on start, when using the command line shortcut, select run as administrator from the command line.
Go to network and internet settings. Network discovery is one of the Windows settings that help you find out if your computer can find other computers and if other computers in the same network can see your computer or not.
By selecting the status option, a menu appears. Click on the network reset option at the bottom to reset the network settings. Finally, click the reset now button to reset the network settings.
Press the start button. Then select settings > network & internet > status > network reset. Read the information that is displayed to you.
How to reset and install Windows 10 network adapter?
To do this, you can press the win + r keys, type cmd, and enter. Apart from this method, you can also reset and install the Windows 10 network adapter from the command line.
Open Powershell or command prompt and run it as administrator. Then type the following commands by pressing enter at the end of each command line:
Netsh Winsock reset netsh int ip reset netsh advfirewall reset ipconfig / flushdns ipconfig / release ipconfig / renew
After finishing the instructions, restart your computer.
On The Network Reset Screen, tap Reset Now and then Yes. This will bring up the option selection menu. Now you can type the following netsh command lines to reset the TCP/IP stack in Windows 10. Finally, click on the reset now option.