Using Hotspot, You Can Turn Your Smartphone Into A Source For Internet Sharing That Other Electronic Devices Can Use.
In this article, you will learn how to use and set up this feature on iPhones.
Fortunately, we are at a time in history when science and technology have penetrated our lives more than ever before, and almost all of them draw their power directly and indirectly from the Internet; Therefore, it is not unreasonable to say that the Internet is the most important human achievement of the last century, which has defined a new need.
Knowing the importance of the Internet, it’s a debt that widespread access to this miraculous technology is so important. It is precisely where the hotspot capability can turn your smartphone into a base for Internet sharing.
This feature is available on almost all smartphones. However, how to set up, activate, and use it can be a little different on iPhones; So in the leading article, we will go to this feature in iPhones.
What is a hotspot?
Going beyond the definitions of a confusing book, Personal Hotspot is a feature that allows the user to share the Internet. To better understand this, suppose you are stuck in a situation where you need an internet connection, but there is no connection point near you.
It is precisely where your smartphone will come in handy with the Hotspot feature to turn your phone into an Internet sharing resource.
How to activate the hotspot on iPhones
As mentioned in the previous section, how to enable Hotspot on iPhones is slightly different from on Android phones. The first thing to note is that by default, iOS has no option to access the hotspot in the Settings or Control Center menu, So first, you have to configure and enable this option. Follow the steps below to activate Hotspot:
- According to the image below, open the Settings section and enter the Cellular tab in the first step. Look for the Cellular Data Network option on the page opening and tap on it. With scrolling in the Personal Hotspot section, you will see three options: APN, Username, and Password.
How to use iPhone Hotspot
After completing the above steps, the Personal Hotspot option is activated and visible in the settings section. To use this feature, follow the steps below:
- In the Settings section, enter the Cellular tab and enable the Cellular Data option.
- Now go back to the main settings page and enter the Personal Hotspot tab. You have to activate the first option, Allow Others to Join, and share the iPhone Internet with other phones and laptops. In the following section, you can change the default Wi-Fi password.
Connect to an iPhone hotspot via Bluetooth on a Windows laptop
The only way to connect to an iPhone hotspot is not to use Wi-Fi; Because this feature can be used even via Bluetooth or a USB cable. However, due to the limitations of Bluetooth technology, data transfer will be much slower than Wi-Fi or USB cable. For example, the fourth version of Bluetooth can transfer data at one megabyte per second, While the fifth generation brings its transfer speed to two megabytes per second.
- Turn on the Personal Hotspot feature on your iPhone. Go to the Settings section, go to Personal Hotspot, and turn on the Allow Others to Join option.
- Next, connect the iPhone to your PC using Bluetooth and make sure Bluetooth is enabled.
- On your PC, go to Bluetooth settings. Turn on the Bluetooth key to make your computer visible to other devices.
- After completing the above steps, connect your PC to the Internet using an iPhone connected to Bluetooth. Click Add Bluetooth or other device and let your computer recognize the iPhone. This process is likely to take some time. Finally, complete the pairing process according to your PC and iPhone instructions.
- Now go to Network Connections. Then select Change adapter options on the right. (To do this, you can use the Windows + X key shortcut and select the Network Connections option).
- Look for an option called Bluetooth Network Connection.
- At this point, if you are connected to the iPhone Bluetooth, you do not need to do anything else. Otherwise, double-click to view active Bluetooth. If your iPhone Bluetooth is not automatically displayed here, click Add a device and add it.
- Finally, click the Connect using button above and select the Access point. Windows sets the connection to Network X, and you can finally enjoy an Internet connection.
Connect to iPhone hotspot via Bluetooth on iPad and Mac
Connecting to a hotspot via Bluetooth is similar to other Windows computers on other Apple devices.
- First, go to the Personal Hotspot tab in the Settings section and ensure the Allow Others to Join option is turned on.
- Go back to the settings and from the Bluetooth section, activate the Bluetooth-related option, and keep the screen open.
- On the iPad, go to Settings and turn on Bluetooth. Tap the device that provides the hotspot, confirm the code that appears, and then tap Pair on both devices.
- On Macs, click on the Apple logo () in the menu bar and select System Preferences. Then click on Bluetooth and make sure Bluetooth is on. Select your hotspot provider and click Connect.
Connect to iPhone hotspot via USB on Mac
The third way to share the Internet between an iPhone and a computer is to use a cable and a direct connection between the phone and the computer, which can be very useful in some situations. To use this method, you must do the following:
- First, connect the USB cable to the iPhone and the Mac.
- Make sure your iPhone is visible in iTunes or Finder (If your Mac does not detect your device, try another USB cable.)
- Navigate to the Mac menu bar, click the Apple logo (), and select the System Preferences section. Now enter the Network section and then select iPhone USB.
- After completing the previous steps, click the More button as shown below, select the Make Service Inactive option, and click Apply.
- Click the More button again, select Make Service Active, and click Apply. Now it is enough to follow the steps we explained to use Hotspot. Go back to your iPhone and then enter the settings; in the Personal Hotspot section, turn on the Allow Others to Join option. After doing this, the Mac will automatically detect the USB cable and connect to it.
Common iPhone hotspot connection problems and fixes
In some cases, the hotspot of the iPhone may not work correctly. Assuming the problem is not hardware, we can overcome this challenge with straightforward tricks.
- Stay on the Hotspot activation page.
When sharing an iPhone hotspot, the most important thing to remember is to make sure you stay on the hotspot activation screen for a few seconds to connect to the third-party device.
- Problem connecting smartphone data
Checking the data connection is the first thing that can disrupt the proper operation of the iPhone’s hotspot; So, so in such cases, it is better to turn your data connection on and off once. You have to enter the Cellular tab in the Settings section and deactivate the Cellula Data option via the drop-down button.
Also, activating the Airplane mode once and exiting it once can help resolve potential network issues and select a faster, closer network.
- Turn the hotspot on and off.
Like checking the data connection, turning the hotspot on and off can be another simple yet effective trick. You have to enter the settings section and click on the Personal Hotspot tab. Finally, on the page that opens, disable and re-enable. Allow Others to Join.
- Update your operating system
Some hotspot problems may be related to bugs in the operating system. The iOS update is released worldwide via OTA and can be downloaded for free. Compatible iPhone users can download the latest updates by going to the Settings section and the General tab and selecting the Software Update option.
- Reset APN
At the beginning of the article, we explained that to activate Hotspot, you need to enter the name of your mobile service provider in the APN section. Sometimes the user may not have entered the correct phrase in this section, and this may cause a hotspot connection problem. So it is better to go back to the beginning of the article and re-read and activate the activation steps.
- Reset network settings
An internet connection is critical to many of the iPhone’s features and functions. If you still have trouble connecting to Hotspot after the previous steps, you may need to reset your network settings. In mind, resetting the network settings will clear all Internet and network data stored on your device. It includes WiFi network names, passwords, Bluetooth, previously paired devices, mobile network preferences, and VPN settings.
It should be noted, however, that resetting network settings does not delete files, content, web browser information, and telecommunications company information. To reset the network settings, follow the steps below:
1. Open the Settings app. Tap the General tab.
۲. On the page that opens, scroll to the bottom of the list and tap Reset.
3. Tap Reset Network Settings. If needed, enter your password, then tap Reset Network Settings to confirm the selection.
- Rename the device or the hotspot password
Sometimes, the connection to the hotspot is not established due to the nominal similarity of the device name with the access points stored on other devices. In such cases, you should change your device’s name or remove the saved access point that is the same name as your device from the list of saved items. To change the name of your phone, open the settings, go to General, and then About. Finally, change the device name by tapping Name.
It is also possible that the specified password is the reason for not connecting to the hotspot. From the Personal Hotspot section, tap the Wi-Fi Password and change the password to solve this problem. It is best to use an eight-digit password with a combination of English numbers and characters.
- Disconnect the VPN connection
In some cases, connecting to a VPN on the phone will prevent other devices from connecting to the hotspot. Especially if the VPN connection is unstable or there is no response from the server, in such a situation, it is as if your phone is not connected to any network and the hotspot of the phone does not exchange data between the receiving device. So you have to disable the VPN through its app or by turning off the VPN option in the settings.
- Restart the device
Turning the phone on and off is always one of the ways you can fix temporary bugs. So if you have tried all the above methods and still the problem of not connecting to the hotspot persists, it is possible to solve this problem.
This article tried to provide complete information on setting up, activating, and using the iPhone Hotspot feature. It is hoped that this article will help you do just that. If you have a problem or a better solution, share it with us in the comments section.