Many Users Are Looking For External Storage Products Such As External Hard Drives And External Ssds Due To Their Needs.
Due to many advantages such as less weight and higher speed, the popularity of external SSD has increased a lot these days, but the main problem is still the price of these tools.
In this case, an attractive solution can be making an external SSD. You don’t always need to pay much money to buy a ready-made product.
In this article, we will teach you how to convert an internal SSD to an external SSD in a simple but practical way, and we will tell you how to make a portable SSD in just a few minutes; join the hardware city.
Advantages of using an external SSD
Maybe until a few years ago, buying an SSD drive inside the system was considered expensive. Still, with the increase in the production of these storage units, portable or external types have also entered the market.
External SSD is much faster than external hard drives and is an excellent choice for moving files. Unlike an external hard drive, an external SSD is nearly drop and impact resistant.
Despite the advantages of external SSD, these products’ prices are usually high.
Fortunately, you can build an external SSD yourself for much less. In this simple but practical article, we will teach you how to make an external SSD and tell you how to convert an internal SSD to an external SSD.
Learning how to make an external SSD in just 5 minutes
You don’t need high technical knowledge to make an external SSD, and you can do it yourself at home by getting the essential tools necessary to convert an internal SSD to an external one.
The necessary devices and tools to convert an external SSD from an internal SSD are:
- SATA to USB 2.5 inch hard disk conversion box
- Two-and-a-half-inch SSD with the desired capacity
- Screwdriver (if needed)
Obviously, to make an external SSD, or more precisely, to convert an internal SSD to an external one, you need a box or a 2.5-inch hard drive to a USB converter. These boxes are abundant in the market, and dozens of brands design and supply them at different prices.
The important thing about choosing a SATA to external SSD conversion box is to select a high-quality package from a high-quality brand, and you should not go for different brands. Remember that the evil design of the electronic board of various packages can even damage your SSD.
In fact, inside these boxes is a SATA to USB protocol conversion chip, which is produced by dozens of different companies. Therefore, it is essential to choose a reliable brand that can give you more assurance of the quality of the product.
As mentioned, the internal to external SSD conversion box is the type of its port or interface. SATA to USB conversion boxes are available in USB 2.0, USB 3.0, USB 3.1, and Type C, so you should buy the generation and type of port or cable according to your needs.
Buying a high-speed USB 3.1 box can be the best choice; However, you should pay attention to the presence of Type C ports in the devices you use. Remember that in some models, it is possible to use a conversion adapter.
Be careful that different boxes may not have good quality and speed, which are unsuitable for converting SSD to external. Also, in many cases, their cables are not of good quality or have a low rate.
As mentioned, to make an external SSD, you need an internal SSD with a 2.5-inch form factor or the usual SSDs, which you can choose depending on the capacity you need or your budget. Our suggestion is to buy brands with a long-term warranty.
Steps to convert internal to external SSD
Now that you have prepared the box and SSD needed to make an external SSD, you need to open the screws of the box and install the SSD inside. It would be best if you did not use too much force for this.
Some boxes may have extra free space, and the SSD is unstable. In this case, you can put a small piece of soft foam or similar at the end of the SSD to make the internal assembly more stable without the possibility of shaking. Some high-quality boxes (like the one in the picture) have unique foam pieces.
Just see the box screws and enjoy the external SSD you made yourself.
It should be noted that all boxes do not have screws, and some of them are fastened through other structures, which are very easy to install or replace SSD.
There are no screws in our sample, and it is easy to install or replace the SSD.
After converting the SSD to external, it is time to test it. If you have controlled everything well and the SSD inside the box is installed correctly and secured, you can connect its cable.
Now you need to connect the SSD to the laptop or computer and ensure it works properly.
It may require partitioning or simply formatting the SSD on first use, which takes less than 30 seconds.
Making an external SSD hard drive and converting an internal SSD to an external one is as simple as you can see, and your portable SSD is ready to use. You can divide it into one or more partitions depending on your needs.
Do not forget that the final speed of your external SSD depends on the SSD used in the box, the speed of the TV, and its cable. Therefore, if the rate is not reasonable, try a better line. However, usually, miscellaneous boxes do not have the speed and satisfactory performance to make an external SSD, and you should get the desired package from a reliable and well-established brand. One of the features of a sound package is a high-speed and safe SSD conversion circuit from internal to external or SATA to USB.
Conclusion
This article taught us how to make an external SSD or convert an internal SSD to an external one. Compared to buying a ready-made external SSD, this has advantages such as a much lower cost, freeing the user to choose high-quality or durable SSDs and the possibility of using or replacing SSDs with models with a long-term warranty.
Suppose the volume of writing operations of your external SSD is high. In that case, it is recommended to use durable models with long-term warranties, such as ADATA Ultimate SU800, to make an external SSD. This SSD is offered in the country with a 3-year Pendulum warranty.
Another critical point in making an external SSD is to use a high-quality and robust box. You can use a good example like ADATA XPG EX500 with a solid and shockproof design to convert SSD to external. This fast, beautiful, and robust product is recommended for gamers.
Also, ADATA XPG EX500 external rigid disk/SSD box does not need a meat page and is easy to install or replace the drive inside. You can convert your 2.5-inch hard disk into an external one using a box instead of an SSD.
Frequently asked questions about making an external SSD
Is it possible to convert SSD to external?
You can use the 2.5-inch USB converter box to make an external SSD.
Can I use SSD as USB?
It is enough to install it inside an external box so that your SSD can be used through the USB port.