Personal WiFi Is Your Digital Asset, So It’s Natural To Keep It Safe And Secure. Just As You Do Not Allow Strangers Into Your Home, You Should Consider Anonymous Connections To Be Suspicious And Dangerous. Continuously Monitor Your WiFi And Exclude Strangers.

Just as you do not allow strangers into your home, you should consider anonymous connections suspicious and dangerous. It would help if you did not allow an alien device to access your network because:

Someone may be consuming too much of your traffic, disrupting your connection.

Someone may be downloading something illegal using your IP address so you will be responsible for the consequences.

Anonymous connections can be intimidating, as they can hack into your personal information.

Who uses my WiFi?

If you want to know which devices are using your WiFi, all you have to do is enter the DHCP settings page by typing your router’s IP address in the browser. In the connected devices section or something similar, you can see all the devices connected to your network. Please make sure all of them are known and remove any you suspect immediately. Some of these connections may have specific names, while others only have MAC addresses.

Note that deleting them will only disconnect them and not block them forever.

If you are not sure which devices are trusted, you can check the MAC address of your authorized devices or disconnect them from your WiFi. Also, disconnect the devices connected to the router via the Ethernet cable. The remaining machines are likely to be unauthorized.

How to get unauthorized devices out of your WiFi?

There are several ways to remove an unwanted connection:

1. Change the WiFi password and network name. Make sure you use a sophisticated password and enable WPA2 protection for extra protection. Of course, this is not a standard method because you will have to make the new password information available to all authorized users. But do not forget that this will increase the security of your network.
2. Use your router settings. Enter the DHCP settings page by typing your router’s IP address in the browser. Disable suspicious connections and change your password immediately so that these users can not reconnect to your network.
3. Enable Mac filtering. If your router supports this option, you can enable it from the router settings. Each device has its own MAC address. Therefore, only users who have your approved MAC address can connect to your network.
4. Use a third-party application. There are many third-party applications for monitoring unwanted users and disabling them. But we do not recommend using them. Invalid applications may collect your data or monitor your activity on the network. If you want to do this, use a valid and secure application.

How to increase your WiFi security?

To secure your WiFi, you should consider the following:

1. Set up a guest network. A guest network disconnects all connections from your primary network. Guest users will not view devices and personal data protected on the private network.
2. Use a long, complex password with WPA2 encryption.
3. Disable publishing and displaying network name (SSID) so that others do not know about your network.
4. Check your router settings regularly for suspicious connections. Be sure to disable such activities if you see them.
5. Do not share your WiFi password with strangers.
6. Change your password once or twice a month.