DED9

How To Install LEMP On Linux Operating Systems?

The term MLEMP stands for Linux, Engine-X, MySQL, and PHP, and refers to the Linux operating system, Engine X, MySQL, and PHP, which are used to build dynamic web pages and applications.

The term LEMP is used to describe the Linux operating system with the Nginx web server, where slow data is stored in a MySQL database and dynamic data processing is performed by the PhoC programming language.

To be able to use this powerful combination in Linux, you need to know how to install these utilities. In this article, we will show you how to install these utilities on your Ubuntu server.

Many developers choose Linux as their core infrastructure and use the Linux operating system for activities such as programming or building web-based applications.

Developers who love open source software and operating systems. This group of developers needs a set of application tools known as LEMP to carry out their professional activities.

Prerequisites

Before we begin the discussion, note that you must first have the Ubuntu Linux operating system installed before you can install these components. In addition, make sure you have a regular non-root account on the server with sudo access. Once you have created the desired account, follow the steps below.

Step 1: Install Nginx Web Server

To display web pages to website visitors, we must use Nginx, which is a modern and efficient web server. Since all the software we intend to use comes from the default Ubuntu package repositories, we need to use the apt package management system to install the necessary components.

Since this is the first time we are using apt, we must first update the server package index and then install the webserver.

We use the following commands to update and install the server:

sudo apt update

sudo apt install Nginx

Once the Nginx installation process on Ubuntu is complete, it runs quickly and is usable. If the ufw firewall is active, you should be able to connect to Nginx.

Fortunately, Nginx is mounted on the ufw firewall, so we don’t have much trouble. Normally, it is recommended to activate the most restricted profile, because even in the minimal case, the traffic is evaluated by the firewall. Since we have not yet configured SSL on the web server, we only need to allow traffic to pass through port 80.

The above situation is activated with the following command:

sudo ufw allow ‘Nginx HTTP’

To confirm the above change, we use the following command:

sudo ufw status

The output of the above command indicates that HTTP traffic is allowed and communication is allowed on the above protocol.

Output

Status: active

To Action From

– —— —-

OpenSSH ALLOW Anywhere

Nginx HTTP ALLOW Anywhere

OpenSSH (v6) ALLOW Anywhere (v6)

Nginx HTTP (v6) ALLOW Anywhere (v6)

Once the new rule has been added to the firewall, enter the domain name or public IP address of the server in the web browser to make sure that the webserver is working. If you have a domain name that points to the server, just run the following command to find out:

IP addr show eth0 | grep inet | awk ‘{print $ 2; } ‘| sed ‘s /\/.*$//’

The output of the above command shows several IP addresses that you can check one by one in a web browser. As an alternative, you can check which IP address is available and can be viewed from various locations on the Internet.

Use the following command for this purpose:

curl -4 icanhazip.com

Enter the address you want to have in your web browser to be redirected to the default Nginx Ford page.

http: // server_domain_or_IP

If the webserver is installed and running correctly, you will see the output as shown in Figure 1 by entering the desired address. The output above indicates that Nginx has been successfully installed.

figure 1

Step 2: Install MySQL to manage site data

Now that we have successfully launched the web server, the next step is to install MySQL as the database management system so that we can store and manage site data. To install MySQL, use the following command:

sudo apt install MySQL-server

Executing the above command installs MySQL database software, but its configuration is not yet complete. To secure the installation, a script comes with MySql that asks you if you plan to edit some unsafe default values.

 Activate the script with the following command:

sudo mysql_secure_installation

The above script asks you to enter a password to use the MySQL system and then asks if you have any configuration to configure the VALIDATE PASSWORD PLUGIN.

It should be noted that activating this feature sometimes causes problems because after activating the above feature, passwords that do not meet certain criteria are rejected by MySQL.

As a result, if you use weak passwords with software that automatically handles MySQL user authentication information, such as Ubuntu packages for phpMyAdmin, you may run into problems.

Disabling the plugin does not pose much of a security risk, as long as you use strong and unique passwords to authenticate the databases.

Pressing the Y key activates the above plugin, pressing any other key will not activate the above plugin.

If you enable authentication, the script will ask you to select a level of password authentication.

Or have the value 2 mean the strongest level, in which case any code that has no numeric values, uppercase or lowercase letters, no special characters, or simple dictionary words is used, error message You see. figure 2

figure 2

Shows selectable options:

If you enable password authentication, the power of the root user password will be displayed and you will be asked if you intend to change this password. If you are satisfied with your password, go through this step by pressing the N key in the command prompt.

In connection with other questions, press the Y key and press Enter in each notification.

In this case, anonymous (guest) users are removed from the test database, remote root inputs are disabled, and the new rules specified are loaded quickly to enable all changes we have made.

Note that on Ubuntu operating systems running MySQL version 5.7 or higher, the MySQL root user is configured to be authenticated by the auth_socket plugin by default instead of the password.

In this way, stronger and more integrated security is created and usability increases in different situations. If you want to use a password as root when connecting to MySQL, you must change the authentication method from auth_socket to mysql_native_password.

To do this, open the MySQL notification in the terminal window:

sudo MySQL

Check out the following authentication method for each of MySQL accounts using the following notification:

SELECT user, authentication_string, plugin, host FROM MySQL.user;

The output of the above command is shown in Figure 3. In this example, we see that the root user is authenticated using the auth_socket plugin. We must use the ALTER USER command to configure the root account for authentication with a password.

 In the following command, make sure you change the password with a strong password:

ALTER USER ‘root’ @ ‘localhost’ IDENTIFIED WITH mysql_native_password BY ‘password’;

Figure 3

Then run the FLUSH PRIVILEGES command to allow servers to load grant tables twice and make new changes.

FLUSH PRIVILEGES;

Check the authentication methods used by each user to make sure that no other root user is authenticated using the auth_socket plugin.

SELECT user, authentication_string, plugin, host FROM MySQL.user;

The output of the above command is shown in Figure 4.

In Figure 4 you can see that the root user of the MySQL database is authenticated using a password.

Once you confirm this status on the server, you can exit the MySQL environment by executing the exit command. The MySQL database system is now up and running, and we need to move on to installing PHP.

Figure 4

Step 3: Install PHP and configure Nginx to use the PHP processor

Now that we have Nginx for web page delivery and MySQL installed for data storage and management on the server, we need to generate dynamic content in the next step. This is where we need a powerful programming tool that lets us create dynamic web pages.

The best option in this area is PHP. Since Nginx, like other web servers, does not have a native PHP processor, we must first install the fast phg-fpm processor, FastCGI process manager.

So we use Nginx to send PHP requests to this software for processing. We install the above module along with an additional help package that allows PHP to communicate with the database.

In this process, the necessary PHP files are also downloaded. This is done by executing the following command:

sudo add-apt-repository universe

You are now ready to install all the components of the LEMP suite, but you still need to configure some settings to tell Nginx to use the PHP processor for dynamic content. This is done on the server block surface.

Server blocks in Nginx are like virtual hosts on the Apache webserver. So we need to create a new server block configuration file in the / etc / Nginx / sites-available directory.

In the example above, the new server block configuration file is called example.com, it is better to choose the name you like.

sudo nano /etc/nginx/sites-available/example.com

By editing the server block configuration file instead of editing the default file, the default configuration can be easily restored when needed.

Figure 5 shows the contents of the default block configuration file that has been edited and should now be added to the new server block configuration file. Each of the blocks and sections is shown in Figure 5 has a specific task to handle.

The description of each of these sections and blocks is as follows:

Figure 5

Listen Specifies which port Nginx should listen to. In the example above, it listens to port 80, which is the default port for HTTP traffic.

Root: Specifies the root of the document where the website files are stored for presentation.

Index Specifies that Nginx prioritizes the display of the index.PGP file if it is required to exist.

S erver_Name: Specifies which server block should be used for each possible sending request to the server.

This command must indicate the name of the server domain or public IP address.

/ Location: The first location block that contains the try_files command. The above command is used to evaluate the pattern of files that conform to the URI pattern. If Nginx fails to find the appropriate file, it returns a 404 error message.

$ Location ~ \ .php : This location block manages PHP operation by referring Nginx to the fastcgi-php.conf configuration file and the php 7.2-fpm.sock file, which declares the php-fpm-related socket.

Location ~ / \ .ht-: Specifies the last location block that is associated with the .htaccess file but is not processed by Nginx. By adding the deny all command, any site .htaccess file in the path of the user request to the root of the document will not be shown to site visitors.

After adding the above content, save the file and exit it. Then enable the new server block by creating a symbolic link from the new server block configuration file in the / etc / Nginx / sites-available / folder to the / etc / Nginx / sites-enabled / folder.

To do this, run the following command:

sudo ln -s /etc/nginx/sites-available/example.com/etc/nginx/sites-enabled/

At this point, you may see structural errors in the new configuration file. To check this, run the following command:

sudo nginx -t

If another error is reported, you should go back and check the file you created first. When you are ready, reload nginx to make the necessary changes. To do this, run the following command:

sudo systemctl reload nginx

The installation and configuration of the LEMP suite are now complete. However, it is better to consider the possibility of communication between all the components that we have installed.

Step 4: Build a PHP file to test the configuration

The LEMP suite is now fully operational, but it is best to do some testing to make sure Nginx is sending the .php files to the PHP processor correctly. To do this, use the text editor that exists at the root of the document to create a PHP test file called info.php:

sudo nano /var/www/html/info.php

Enter the following commands into this new file. The following commands are valid PHP codes that retrieve information about the server:

<? PHP

phpinfo ();

Finally, save the file and exit.

You can now view this page in a web browser by referring to the server domain name or its public address along with the page info.php.

 To do this, run the following command:

HTTP: //your_server_domain_or_IP/info.php

You should now see a web page created by PHP to provide information about the server (Figure 6). If you see the above page, it means that PHP is installed on Nginx without any problems.

After confirming that Nginx processes pages properly, it is a good idea to delete the file you created, as unauthorized people may gain information about the server configuration and may use it to infiltrate the server.

Note that this file can be re-created whenever you need it. Use the following command to delete the above file.

sudo rm /var/www/html/info.php

Figure 6

 

Die mobile Version verlassen