DED9

How To Connect The IP & Mac Address Of The Modem Or Router?

As You Know, Hacking Threats Are Constantly Evolving, And Hackers Try To Infiltrate Networks And Equipment Within Networks In A Variety Of Ways. As A Result, Users And Large Organizations Have To Take Some Personal Steps To Protect Their Communications Network And Sensitive Information. 

These include using secure transfer protocols such as PPTP and binding addresses and IP addresses to each other.

IP & Mac Binding, referred to as the Address Resolution Protocol in routers (ARP), allows routers to connect the IP address of networked devices to their address. This approach prevents hackers from carrying out ARP protocol forgery attacks and other ARP-related attacks because any device will only be able to communicate with the Network when it has an IP address that matches the ARP list, and if an address The IP prevents a router from trying to connect to the Network with an unknown address.

Link IP addresses and addresses

To do this, first, open the TipiLink router settings page at 192.168.1.1 and enter the relevant password to access the settings.

2. Go to IP & MAC Binding and then Binding Settings.

3. To manage a device, you can view the device’s address and IP address on the local Network using the ARP list and then configure the elements. This page shows the ARP list and all IP & MAC Binding entities.

You can select an option and click the Load Selected button to load the ARP list for that entity.

4. Select the Enable option to access the ARP Binding feature.

5. Click the Save button and then select the Add New button.

6. Enter the MAC address and IP address, select the Bind check box, and click the Save button to save the changes to the router.

Configure PPTP / L2TP communications

Another practical option provided by TipiLink routers is to secure communications based on a private LAN. Of course, to use the above feature, you must pay attention to two critical points. First, the client supports PPTP / L2TP. also, follow the steps below to take advantage of the PPTP / L2TP capability of TP-Link routers. , note that some Internet service providers offer PPTP / L2TP-based communications. In this case, you can use a PPTP / L2TP client connection to communicate. Counter the router management page, click the Advanced tab at the top of the page, and then go to Network -> Internet in the left panel.

2. Select PPTP as the Internet connection type.

3. Then, enter a valid password and username.

4. In this step, you must enter the IP address of the VPN Server IP / Domain Name. (For example, 219.76.10.41, or if you have a VIP server with a domain name, you must enter the domain name in this section. Note that the IP address you enter in this section is the address that allows you to connect to the Internet securely. )

Click the Save button and then Connect.

You can now use a secure connection to do business.

Die mobile Version verlassen