DED9

11 Ways to Fix Windows 10 Installation Stuck

Although installing Windows is entirely interactive and proceeds according to your wishes, this does not mean you will not get stuck when installing Windows!

There are many reasons for the problem of Windows getting stuck duri; installation, the missing file, slow hardware, or driver and hardware incompatibilities are the most important of them and adjusts own solutions.

Just entirely that you. St ill, somewhere memorized, but somewhere for some reason, no matter how hard you try, you can’t remember a p; of it. But don’t worry; in this tutorial, in addition to the reasons, we will explain in detail all the solutions to the problem of getting stuck when installing Windows so that you can get through this stressful process as soon as possible.

Just keep calm and let the system stay on for a few hours to diagnose itself. If the system remains in this state, you should do the work yourself and try other solutions.

If you’re ready, let’s get started:

Table of Contents

The problem of getting stuck when installing Windows
1. wait a little
2. Install Windows using a flash drive
3. Check the region and language options
4. Change the name of the Software Distribution folder
5. Fix error 0x80300024
6. Disconnect monitors and peripherals from the system
7. Enable TPM 2.0 and Secure Boot
8. Do a Clean Boot
9. Scan your system using SFC and DISM command
10. Change BIOS settings
11. Update or reinstall the network driver
A general summary of the reasons and solutions to the problem of getting stuck when installing Windows

The Problem of Getting stuck when installing Windows

It is a bit difficult to determine precisely why Windows is stuck. It is enough to pay attention to this aspect of the case that each stage of Windows installation requires a series of specific files to implement the next phase of building. Now, if the files needed for the next step are unavailable, downloaded, or lost, we may face the problem of getting stuck when installing Windows. Depending on the type of Windows version, this problem can appear in messages such as Windows 10 installation stuck in getting ready, Windows 7 installation stuck on the logo, and Windows 10 installation stuck in just a moment.

Of course, the lack of hardware requirements and system incompatibility sometimes cause this problem. That is why before installing Windows, especially Windows 11, it is better to check the hardware requirements to ensure your system’s hardware power hosts the desired Windows.

In general, we recommend that you make a backup copy of your system before starting the upgrade or installation to restore the approach to the previous state in case of problems and check the system’s hardware compatibility with PC Health.

This also applies to Windows servers. Your server must exceed the hardware power required to install Windows Servers. For example, Windows Server 2022, as the newest member of the Windows Server family, requires at least a 64-bit 1.4 GHz processor, 512 MB of RAM, and 32 GB of disk space.

Of course, virtual server providers have made things easier for you. The fact that you can decide on your needs when ordering your server and entrust the installation and management of Windows servers to an experienced team is a huge advantage. So, go to the Windows virtual server purchase page and take a firm step toward your goals by ordering the desired server.

 

1. wait a little

Yes. The easiest solution to Windows stuck problem is to wait until the problem is solved. For example, when you encounter the message “Getting Windows ready, don’t turn off your computer” during installation or update, the system is processing essential tasks such as downloading and installing files, setting modules, etc., and the successful completion of these tasks probably caused you to experience the problem of getting stuck when installing Windows. Preparing the files is why you encounter the issue of Getting files ready for installation when installing Windows.

For this process to go properly and the Windows 10 installation stuck message in getting ready to give way to system boot, the best and most correct thing you can do is wait and let the system do its work.

It is usually recommended to wait patiently for 2 to 3 hours when you see the getting ready message in Windows installation, and then try other solutions if the system fails to solve the getting Windows ready problem.

2. Install Windows using a flash drive

Suppose you have decided to upgrade your Windows. In that case, it is better to say that if you use an external driver to change or install Windows instead of Windows Update, the chances of encountering problems such as getting stuck while installing Windows are less.

Fortunately, Microsoft is on your side, and by providing 32-bit and 64-bit installation files, it has tried its best to simplify this process. To learn this installation method, you can take help from the article on installing Windows 10 with a bootable flash.

Follow the desired Windows ISO file and convert your flash into a bootable driver using tools like RUFUS. Then boot your system with it and follow its instructions until you finally install Windows.

3. Check the region and language options

The “Something Happened” error is one of the error messages related to the Windows installation and upgrade process.

Windows

 

 

If you haven’t found a solution for this problem on the Internet, we must say that this error also has its resolution, and we hope that by implementing it, you will solve the problem of Windows getting stuck.

Click on Start and open Control Panel.

 

Click on Region and select your Region.

 

Click on the Administrative tab and select Change System Locale.

 

 

Select the desired language (preferably English) and click Apply and Ok.

4. Change the name of the Software Distribution folder

This folder contains the Windows directory; all the temporary files necessary for it’s update and installation process are stored in this folder. Sometimes, by changing the name of this folder, you can solve the problem of getting stuck when installing it.

Just do the following steps in order:

Open CMD as Run as administrator.

Enter the following commands one by one, and after each one, press Enter to execute them:

net stop bits
net stop wuauserv
net stop cryptSvc
net stop msiserver
net stop bits and net stop wuauserv

 

To rename the Software Distribution folder, enter the following command and press Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

Then, rerun the following commands one by one to reset this folder and change its name:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver
net start wuauserv net start cryptSvc net start bits net start msiserver

 

Restart your system and then check if the problem is solved or not.

5. Fix error 0x80300024

This error is one of the Windows installation errors and usually happens when the files required for installation are not completely downloaded, or the Windows installation folder is damaged.

To resolve this issue, open the SoftwareDistribution download folder and delete its contents.

C:/Windows/Software Distribution/Download

Or open CMD as Run as Administrator.

Run the following command:

Dism /Online /Cleanup-Image /RestoreHealth

Finally, run the following order to apply these changes:

exe/updatenow

If this method does not work, you should get help from Registry Editor.

Click Start and type regedit to open it:

In the address bar section, enter the following path:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate

Next, right-click the WindowsUpdate folder, create a new key, and name it OSUpgrade:

Then right-click in the left panel, create a new DWORD named AllowOSUpgrade, and set it to 1.

 

Restart your system and check if the Windows installation stuck issue is resolved.

6. Disconnect monitors and peripherals from the system

Sometimes the connection of peripherals can be the reason for Windows to get stuck. Especially programmers and gamers who use additional monitors to increase their performance and speed may encounter this problem when installing Windows.

 

To solve this problem, it is better to use only one monitor and disconnect all USB devices and other additional accessories from the system. Then test whether the Windows installation problem is solved or not.

 

7. Enable TPM 2.0 and Secure Boot

Sometimes users encounter the following error while installing Windows 11 and can no longer proceed to the following steps:

Even if you check your system with the PC health tool before installing Windows 11, this message indicates that your installation process will have problems due to TPM 2.0 and Secure Boot.

So let’s look at how to solve these problems:

How to activate TPM 2.0

If you are sure your system supports TPM 2.0 but still encounter this type of error, this feature is probably not enabled. So you must follow the following steps:

Press Win + R, and type tpm. MSc, and click Ok.

After the TPM Manager program opens, check the Status section to see if this feature is enabled.

If you see the message The TPM is ready for use, the situation is in order, and it is better to go to the secure boot activation stage.

Otherwise, follow the steps below to enable TPM 2.0 on your system:

Restart your system and press the “F1, F2, F10, F11, or DEL” buttons (depending on the type of system) to enter the startup menu.

Next, go to the TPM device from the security section.

Select the TPM version from the available list and restart your system after saving these changes.

How to enable Secure Boot

Restart your system and enter the startup menu like TPM.

Enter the BIOS settings, click the advanced tab, and select boot options.

Find Secure Boot from the options and enable it.

Save the changes and exit this section.

Restart your system and enter the startup menu again.

Select the boot device option and manually select the Windows 11 bootable drive.

Let the Windows 11 installation process begin with the bootable flash.

8. Do a Clean Boot

With this, the process that is supposed to go through when downloading a new Windows becomes lighter, which can solve the problem of getting stuck when installing Windows.

To Clean Boot your system, you must follow the following steps:

Press the Win + R key combination, type msconfig, and click Ok.

 

In the System Configuration window, click Services.

Check Hide all Microsoft services and click the Disable All button.

 

Then go to the Startup tab and click the Task Manager window link.

 

Select all unnecessary startup tasks and click the Disable button in the lower right corner.

 

Finally, restart your system.

9. Scan your system using SFC and DISM command

As we mentioned in the reasons section, the failure of some files required for installation can also cause the problem of getting stuck when installing Windows, so it is better to scan and repair these files by running System File Checker.

The internal tools of the Windows system, such as SFC and DISM, have made this task easier for users, and all you have to do is perform the following steps:

Open CMD as Run as Administrator.

Enter the following command and press enter.

sfc /scannow

After this command, the System File Checker tool will start working, and you should wait until the status of this scan has reached 100%.

Then run the following command to determine the corrupted system files and press enter.

Dism /Online /Cleanup-Image /CheckHealth

 

The following command is also used for more advanced scanning of the operating system image, so run it as well to perform troubleshooting with more confidence:

DISM.exe /Online /Cleanup-Image /ScanHealth

Run the following command to fix the errors that were discovered after the scanning process:

DISM /Online /Cleanup-Image /RestoreHealth

 

Then, to correctly complete the error repair process, run the following command to wait when it is not finished:

Dism /Online /Cleanup-Image /restorehealth

 

Restart your system and then see if the Windows installation problem is solved.

10. Change BIOS settings

Sometimes, BIOS configurations can cause Windows to get stuck during installation. To solve this problem, go to the BIOS section and change the related settings.

To do this, you must first restart your system and enter the BIOS section by pressing the Del or F2 button (depending on the type of system).

According to some users, the Legacy Floppy Drive Support and Intel SpeedStep feature cause this problem, so turn off these features to solve it.

Some users claim that the HyperTransport feature causes this problem, and to fix it, you need to set KN HT Speed to 1X and KN HT Width to 8.

Finally, save these changes and restart your system to see if the Windows installation problem is resolved.

11. Update or reinstall the network driver

Sometimes, Windows getting stuck during installation is also related to the incorrect operation of the network driver. To solve this problem, you have two solutions:

– Update the network driver.

Press Win + X and select Device Manager.

Double-click on Network adapters to open the list of drivers.

Then right-click on your network driver and select Update driver.

Click on Search automatically to download and install the latest version of the desired driver.

– Uninstall and reinstall the network driver.

Press Win + X and select Device Manager.

Double-click on Network adapters to open the list of drivers.

Then right-click on your network driver and select Uninstall device.

A warning message will appear; check Delete the driver software for this device and click Uninstall.

Download and install the driver from your system manufacturer’s website.

Finally, restart your system and see if the Windows installation problem is solved.

Of course, if you think the problem is with the network and the Internet, turning off the firewall and antivirus can also solve this problem.

 

A General Summary of the Reasons and Solutions to the Problem of Getting stuck when Installing Windows

If Windows has a problem in the Setup process:

The boot files are probably corrupted; to solve that, it is better to download the ISO files and try the bootable flash installation again.

The second suggestion is to run the SFC and DISM troubleshooting tools to repair the corrupted files.

If the Windows installation process is stuck on adding a Microsoft account:

We recommend you skip this step and instead create a local account and continue the Windows installation process.

If the installation process is stuck on the Windows logo:

In this situation, you should boot the system in Safe Mode or use Advanced Startup options to troubleshoot and restore the system. Of course, upgrading UEFI can also solve this problem.

If the Windows installation process is stuck on Getting Ready:

In this case, there’s not much you can do but wait. Maybe after 5 hours, you still don’t pass this step, which is better to restart the system and start the installation process again.

If the Windows installation process is stuck on Just a moment:

Turning off Internet connections and removing accessories can solve the problem of getting stuck when installing Windows.

If the Windows installation process is stuck on Getting files:

The USB you chose to install Windows may be slow, so it is better to use a faster USB.

If the Windows installation process is stuck on a blue screen:

It is better to disable launch CSM and enable UEFI; for this, you need to go to BIOS settings, turn off secure boot in the security tab, and switch to UEFI.

If the Windows installation process is stuck at the stage of downloading files:

A BIOS update can solve your problem.

In general, waiting (2-3 hours) is the best thing you can do for the problem of Windows getting stuck during installation. If the situation is the same, you should think about other solutions.

Conclusion

Many reasons can cause the problem of Windows getting stuck when installing Windows, the most important of which is the failure of the installation file or hardware failure. If you can guess the reason for the problem, how much better! Just implement its unique solutions. If you don’t know the reason, there is no need to worry because the answers in this article were collected to solve your Windows installation problem, and one of them will surely solve your problem.

Thank you for staying with us until the end of the article. We hope that reading this article was helpful for you. If you have any questions, or requests and need guidance, you can contact us by registering your opinion so we can answer you as soon as possible.

 

Die mobile Version verlassen